Tableaux — Photo-shoot / Image Selection

When I went to take the photos there was a slight problem that the area wasn’t lit as well as I had hoped because the shoot took place in the evening an it was dark, to combat this I boosted the iso on my camera slightly higher than I would have liked but not so much that the grain was immediately evident. Then as I didn’t have a trigger and the tripod I was using is not very strong and I have a large camera my friend who was operating had problems keeping the camera still, the way that I combated this is I set the camera to have a 5 second timer and to take a two shot burst at the end of the timer. This eliminated most of the shake but there was still some.

SOME PHOTOS MISSING

 

The problem that I had is that image 3227-8 I sat in a bad place and didn’t realise until I reviewed them the next day. The problem was that because in that pose i was leaning onto the back of the pew in-front was being obstructed by a more important image that I later took that was more important to the shoot and would stand out more. So I had to leave images 3227-8 out of the final edit. And all of the images in the green boxes made it into the edit and some that wouldn’t appear on the contact sheet.

Leave a Reply