objects studio photo shoots planning

Intro

in this experiment i am going to photograph objects and i decided in this photo shoot to take still photos of objects from the German Occupation, these objects where brought from the Jersey Archive to give us an opportunity to photograph them, and this is how i planned to do that:

Setups

i decided to use two different setups to photograph my objects as some different objects need to be photographed at different angles and these are the two setups i used:

Straight on Angle Lighting Setup

For the straight on angle set up I used a continuous light set up. I used a fill light illuminating the object, with a secondary (tungsten light) light source to reduce the shadows and clearly showcase the object. I also experimented with back lights, but felt that it was not successful and did not justify the objects, thus I stopped using the back light. The camera was on a tripod with a 50 mm lens.

Birds Eye View Lighting Setup

For this set up, I used two flash head lights, set on a 2.0 power output. The lights where paced either side of the table, slightly facing downwards towards the object. On my camera I used a transmitter which triggered the flash heads to operate as I captured my imagery. In addition, I also used a pilot light in order to position a and frame my composition, this was located at the back of the table (on right) and did not affect the coloring or the outcomes of my image. The camera itself was placed on a tripod looking down at the table.

My plan is to work on this project with my friend who also takes photography so we can exchange skills and get the best results. we are going to go to the studio for three hours divided into three school days and use one camera between us and take photographs on different personalized settings then comparing the results to come out with an even better setting for the camera. We are going to start photographic the most suitable eye catching 3D objects using the straight on angle lighting setup, and afterwere done with that were going to photography the flatter objects on the birds eye view lighting setup.

Leave a Reply